BAYSILONE IMPREGNATING EMULSION WA

PRODUCT DESCRIPTION
Solvent-free siloxane/alkylalkoxysilane emulsion in water

APPLICATION AND PROPERTIES
Baysilone Impregnating Emulsion WA is suitable as a water-thinnable impregnating agent for masonry. The product is characterised by its good penetration into absorbent mineral building materials. Its content of higher alkylated raw materials allows to apply it on alkaline building materials. It can be used for the water repellent treatment of the following substrates:
• concrete
• fibrous cement products
• calcium silicate brick
• natural stone
• plaster
• brick
It is also good suitable as an aqueous deeply penetrating primer for coatings like emulsion- and silicone resin paints and synthetic resin plasters.

PACKAGING
1.000 kg Container, 180 kg and 50 kg drums Further information on product safety and handling is given in the Safety Data Sheet.

STORAGE
Correctly stored in its original unopened container at 25°C, WA has a shelf life of 720 days from the date of manufacturing. Please see also use-before/expiry date on product label and certificate. The product must be protected against frost and heat. Storage at temperatures below 5 °C and above 40 °C should be avoided.

Ready-to-use formulations will remain stable and suitable for application for more than 6 months. If they are stored over a longer period, the formulation may separate and should be homogenised by stirring before application.